How to boost mains?

(by Salamander Pumps)
Salamander Pumps

Homeowners as well as installers are often faced with a complex challenge of boosting mains water pressure. Salamander Pumps offer a range of products that is aimed at creating a simple solution to solving poor water pressure and flow problems.

Barco now offers Salamander MainsBooster range including HomeBoost, CombiBoost and AccuBoost. Available for next day delivery.

Cyclone Plus InsideCyclone Plus Screwed Connections
Screwed connections with compression fittings
Cyclone Plus Smooth Coil
Smooth tube,
high-efficiency coils
Cyclone Plus Cylinder frontCyclone Plus Caleffi Components
Caleffi safety components
Cyclone Plus Cold Feed Pipe
Cold feed with dip pipe and diffuser in bottom of cylinder
Cyclone Plus Unvented Hot Water Cylinders

Salamander MainsBooster collection includes 11 different products It features inline pumps and accumulator tanks. It is designed to provide a quiet, lightweight and easy-to-install solution to all domestic and light commercial mains water boosting needs.

Along with this range, Salamander Pumps are helping to make specification much simpler, by introducing an easy-to-use product selector.

Salamander Pumps mains boosting range includes:

  • CombiBoost – an entry-level inline pump boosting mains water flow up to 10 litres per minute.
  • HomeBoost – an intelligent inline mains pump, which recognises when water pressure and flow are low and automatically boosts the incoming mains water up to 12 litres per minute.
  • AccuBoost – a range of accumulators which store mains, cold water at pressure, before releasing the water into the system when an outlet is opened. Salamander’s AccuBoost range comprises five different sizes; 60L, 120L, 180L, 300L, 450L, with all sizes except the 60L available in either pumped and unpumped models.

AccuBoost accumulator tanks have been carefully designed to provide all-in-one solutions, meaning most models require little assembly, and ensure a much simpler installation. Choose pumped when mains water static pressure is less than 2.0 bar and/or mains water flow is less than 12 l/min. The pumped option will ensure a minimum flow rate of 12 l/min plus the additional flow provided by the accumulator tank.

The accumulator tanks are manufactured from lightweight composite vessels, rather than traditional steel, reducing the weight significantly.

Uniwipe range available from Barco

ULTRAGRIME Wipes
Designed to handle any and all messes no matter your line of work. Perfect when you need to clean up oil, grease, ink, paint, silicones, or uncured PU foam.
Code: UGWIPE
Pack of 100
Size: 380x250mm
CLINICAL MIDI Wipes
Highly effective disinfectant cleaning wipes with outstanding microbiocidal performance, Active against bacteria, fungi and viruses.
Code: WRWIPE
Pack of 200
Size: 220x200mm
ANTI-BAC Wipes
Use these on your tools,  in your vehicle, at work or home and on any surface that you need germ and dirt free. Professional grade cleaning and disinfection.
Code: ABWIPE
Pack of 100
Size: 380x250mm

Uses

Two sensors, two uses

Specifications

Product code
Battery capacity
Charging specifications
SENTA
Product size
Standby power consumption
Micro USB (5V/500-1000mA)
Sensing range
Side 1-6cm, Bottom 1-10cm
3.7v lithium battery(400 mAh)
Applicable water pressure
47mm x 47mm x 79mm
Fitting faucet nozzle
Environmental temperature
Male M24 & Female M22
1-40˚C
Environmental humidity
Water efficiency level
Waterproof level
≤95%RH
IP 65
≤0.2mW
0.05-0.8Mpa(7.25-116psi)
Water saving efficiency
- Rate of flow is 0.07 L/S under 0.1 MPa
- 0.1 second rapid response
- Level 1 grade of water saving
Senta Rechargeable Design

Installation

Senta Installation Drawing

For price and availability call us on 01707 334 840 or email sales@barco.net

See Barco Online Product Guide
Included Fittings
Yes
Cold Water Inlet Set
Direct Cyclone Plus
Indirect Cyclone Plus
15 x 22mm Tundish
Fitted Temperature and Pressure Relief
Yes
Expansion Vessel andBracket
Yes
Yes
Yes
Immersion Heater(s)*
Yes
Yes
Yes
2 Port Zone Valve
Yes
Dual Thermostat
Yes
Instruction Manual
Yes
Yes
Yes
Yes
Step 1
Select hot water demand based on number of bathrooms
Shower
1 Bathroom
1 Bathroom
& 1 En-Suite
2 Bathrooms
3 Bathrooms
Step 2
Select number of bedrooms
1 Bedroom
2-3 Bedrooms
3-4 Bedrooms
4-5 Bedrooms
5-6 Bedrooms
Step 3
Select type of cylinder
Indirect
Direct