The new Joule Cyclone Plus cylinders are manufactured in the United Kingdom

(by Joule)

We now offer the new Cyclone Plus range from Joule that is manufactured in the United Kingdom. Joule is confident that this will greatly improve their availability and delivery times. The new range is also very competitively priced.

Download brochure >>

Cyclone Plus Unvented Hot Water Cylinders

The range offers a fresh new look while adding functionality. It includes a newly designed cold feed dip pipe, lower heat loss values and higher and faster heat recovery rates.

Main features and benefits to include:

Smooth tube, high-efficiency coils
Screwed connections with compression fittings
Cold feed with dip pipe and diffuser in bottom of cylinder
Caleffi safety components as standard

Application

Colour

Inlet

Outlet

Code

HWSF15-22

White

15mm JG Speedfit

Small water heaters & some boilers

22mm compression

Fittings

The Cyclone Plus range has been designed to facilitate trouble free installation. It comes with all components needed for a complete installation.

Uniwipe range available from Barco

Fittings

The Cyclone Plus range has been designed to facilitate trouble free installation. It comes with all components needed for a complete installation.

Uses

Two sensors, two uses

INSTANT USE
» Self opening when come into the sensing range
» Self closing when leave the sensing range
» Self closing after 1 minute of continued use

CONSTANT USE
» Wave the side sensor to open
» Wave the side sensor to close
» Self closing if there is no action after 3 minutes

Specifications

Product code

Battery capacity

Charging specifications

SENTA

Product size

Standby power consumption

Micro USB (5V/500-1000mA)

Sensing range

Side 1-6cm, Bottom 1-10cm

3.7v lithium battery(400 mAh)

Applicable water pressure

47mm x 47mm x 79mm

Fitting faucet nozzle

Environmental temperature

Male M24 & Female M22

1-40˚C

Environmental humidity

Water efficiency level

Waterproof level

≤95%RH

IP 65

≤0.2mW

0.05-0.8Mpa(7.25-116psi)

Water saving efficiency

- Rate of flow is 0.07 L/S under 0.1 MPa
- 0.1 second rapid response
- Level 1 grade of water saving

Installation

For price and availability call us on 01707 334 840 or email sales@barco.net

See Barco Online Product Guide

Cold Water Inlet Set

Temperature & Pressure Relieve Valve

Dual Thermostat

Immersion Heater

Expansion Vessel & Bracket

2 Port Zone Valve

15x22mm Tundish

Included Fittings

Yes

Cold Water Inlet Set

Direct Cyclone Plus

Indirect Cyclone Plus

15 x 22mm Tundish

Fitted Temperature and Pressure Relief

Yes

Expansion Vessel andBracket

Yes

Yes

Yes

Immersion Heater(s)*

Yes

Yes

Yes

2 Port Zone Valve

Yes

Dual Thermostat

Yes

Instruction Manual

Yes

Yes

Yes

Yes

Step 1

Select hot water demand based on number of bathrooms

Shower

1 Bathroom

1 Bathroom
& 1 En-Suite

2 Bathrooms

3 Bathrooms

Bedsit

1 Bedroom

2-3 Bedrooms

3-4 Bedrooms

4-5 Bedrooms

5-6 Bedrooms

Step 3

Select type of cylinder

Indirect

Direct

We are here to help

So don’t forget to call or email us if you have any questions regarding our products or if you would like to discuss terms of partnership.

Tel: 01707 334 840
Fax: 01707 372 621
sales@barco.net

Tel: 01707 387 940
Fax: 01707 387 920
creditcontrol@barco.net

Tweets by BarcoPlumbHeat

Copyright © Barco Sales Ltd. Company No: 02692195. 15 Bessemer Road, Welwyn Garden City, Herts. AL7 1HB